After a moment of thinking, you might finally want to build your own watering system for house plants. Caring for plants inside your house could make the atmosphere more fresh and lively than ever. However, there would be times when you need to leave the house for a moment, hence you need something to keep the plants hydrated. However, if you want to install a fully automatic watering system for indoor plants, it could cost you a fortune and time. Maybe something like a DIY self-watering system for house plants would also work pretty well if you do it right. So, you would want to do your own self-watering system for house plants so that you could care for them even if you are away.
Here are some ideas for watering system for indoor plants:
The most popular method would be the indoor drip watering system. Even though this method has a huge flaw, that is the obvious watering tubes that connect the water source with the plants. You just need to set the timer and the system would run the dripping into the pots for a designated amount of time. This way, you would never over-watering the plants and yet you don’t have to worry about being away for a while.
You can also use the plant watering spikes or globes. They are small devices designed to water your plants by capillary action. Whenever the soil around the planted spikes or globes gets dry, the water would automatically move from the reservoir into the dry soil. As for the reservoir, you have to create your own since these devices do not come with one. You can use any empty bottle as a reservoir which connects to the watering spikes. However, if you use a large bottle, it might get pretty heavy and could compromise the balance.
The more sophisticated method would require you to be quite tech-savvy for the DIY self-watering system for house plants set up. You can use the sensor combined with a water container. Set up the sensor so that whenever the soil is dry, the reservoir will automatically send down some water. You could set the amount of water to be sent down each time so that there will be no excess water anywhere. You can also adjust your water reservoir tank into your need, the bigger, the longer automatic watering system for indoor plants would last.
There is also a self-watering system for house plants which don’t require any complicated set up like the previous one. Love to have plants on hanging baskets? There are actually hanging baskets with self-watering systems. The principal would be similar with the watering spikes. However, in this setup, you just need to fill the reservoir tank up to the required amount. Once the soil needs hydrating, it would draw the water from the water tank and water itself necessarily. Since the principal is like the capillary, once the soil is hydrated enough, it would stop drawing water. Make sure to choose the ones with enough rooms for the root to grow, or else, your plant might not grow optimally.
Whenever you want to set up a watering system for house plants, make sure to make one based on the schedule. Generally, a self-watering system for house plants would have a schedule to water itself in the morning. This is to prevent the plants from getting heated as the day comes high. You should also remember while setting up automatic watering systems for indoor plants to pay attention to the flowering cycle. If your plant is on the flowering cycle, then it would need more water than usual. Some plants don’t need watering that frequently, they just need a good amount once in a while. Make sure to establish your DIY self-watering system for house plants based on the need of each plant. Failure in recognizing their need would only lead to overwatering and delayed growth.
You wouldn’t want to get disappointing results while you tried your hardest to establish your own watering system for house plants. Make sure to choose the ones which suit your condition the most, and don’t overdo yourself with huge reservoir tanks. Do it right and you don’t have to worry about watering your plants while you are away anymore!